Water Test Kit for Lead

Home / Water Test Kit for Lead


SKU: 
WS-207
Name: 
Water Test Kit for Lead
Brand: 
WaterSafe


Weight: 
0 lb
Price: 
$9.95

Quantity: 
 



Information
The Watersafe Lead Test can detect dissolved lead at levels below the EPA Action level of 15 parts per billion (ppb).

Why to use Watersafe Lead Test?

� One-step lead test kit that can detect dissolved lead at levels below the EPA Action level of 15 parts per billion (ppb).
� Simple methods, clear directions, and first class quality non-toxic test ingredients guarantee dependable test results.
� Prompt and reliable test done in one easy step and gives you results in just 10 minutes!
� EPA-based, laboratory certified test kit

Lead Test Instructions
1. Open Watersafe foil packet and take out all contents. The kit contains one Lead Test strip, one sample vial, and one dropper pipette, as well as a desiccant packet (to be discarded).
2. Using dropper pipette, place water sample in the test vial. To pick up sample, tightly squeeze the bulb at the end of the pipette and place the open end into water sample. Release the bulb to pick up sample into vial. Use only one pipette-full of water. Swirl vial gently for several seconds. Place vial on a flat surface.
3. Place the Watersafe test into test vial, with arrows pointing down.
4. Wait 10 minutes. Do not disturb strip or vial during this time. Blue lines will appear on the strip.
5. Take the strip out of the vial and read results
6. Note: If no lines appear, or both lines are very light, the test did not run properly and the result is not valid. If a test strip shows a positive result, your water sample may contain lead at a toxic level.